Page History
...
When you enter the room the main PC is the one where the cable from the celing (IPS and labcam) are connected (it is the third PC from the entrance door when you go straight).
- Start the router by using turning on the wallplug using the white remote control (position 2).
- Start the main PC. If you do not see a login screen this most likely because the login screen is shown either on the big screen on the wall or the screen on your left. You can either unplug the second screen or turn the corresponding screen on (worst case, turn on both).
- Check the current branch and checkout your branch if necessary.
- Use
git clean -xdf - Use
./build_all.bash - Start the LCC
...
The idea of the NUCs is to simulate a potent computer on a real vehicle for each vehicle. If you do not use the "NUC"-mode, all calculation will be done centralized on the main PC.
Turn on NUCs
Switch on the wallplug of the server rack by using the white remote control usually close to the main PC. The NUCs start automatically and each NUC will signal the LCC individually that it is online. You can find the online NUCs in the window on the bottom next to the button "reset view" at "HLC online". When you open the menu each NUC that is online is displayed. For each vehicle there is one corresponding NUC. The IDs have to match (e.g. vehicle 6 to NUC 6).
...
Overview
Content Tools