Page History
...
Should the communication with the MLC fail repeatedly, the LLC will enter a safe mode. The motor is commanded to brake. The safe mode is indicated by flashing all LEDs.
Device Programming, Fuses
When programming the ATmega for the first time, the following fuses must be changed.
Warning |
---|
If vehicle is behaving irregularly i.e. servo steering is acting erratic, LEDs timing appears off, this is most likely due to an issue with the clock. Check:
|
Tests
By setting a jumper, a test mode is activated. This allows testing the inputs and outputs without the MLC.
Multimedia | ||||
---|---|---|---|---|
|
Overview
Content Tools