Indoor Positioning System
A Basler camera is used for the indoor positioning system in the lab.
The system was originally intended to work in the infrared. The NIR sensor was selected for that reason. Due to eye safety concerns the system was switched to visible light.
The camera is mounted at a height of 3.3 meters to overlook the complete map area. It is centered to the map and orientated straight downwards. In order to simplify the positioning of the camera, we installed three aluminum profiles in an H-form to be able to move the camera along the x- and y-axis.
|Camera Sensor Format||1"|
|Pixels (H x V)||2,048 x 2,048|
|Conformity||USB3 Vision, GenICam|
|Dimensions (mm)||29.3 x 29.0 x 29.0|
|Exposure Control||Freely Programmable|
|Frame Rate (fps)||90|
|Imaging Device||CMOSIS CMV4000 NIR-enhanced|
|Input/Output Options||1 Opto-isolated Input/Output, 2 Fast-GPIO Ports|
|Operating Temperature (°C)||0 to +60|
|Pixel Size, H x V (μm)||5.5 x 5.5|
|Power Requirement||Via USB 3.0 interface|
|Synchronization||Via External Trigger, or Free-Run|
|Type of Sensor||Progressive Scan CMOS|
|Type of Shutter||Global|
|Video Output||USB 3.0|
A Basler ethernet camera records videos of the experiments.